Snowflake Monday

Last week's pattern marked the first of four smiling snowflakes I churned out in about 2013 and then forgot about for approximately a dozen years. I'm trying to reverse engineer the old flakes (which, in case you wondered, were made with my own hand-dyed size 30 crochet thread and a size 12 crochet hook) now, each with (in my opinion) the best of the four faces I created back then. I think I was in "if at first you don't succeed" mode back then because the four smiling face snowflake centers are similar, but each shows a bit of improvement. Today's is the second of the batch. I plan to re-create the final two in the coming weeks. A month full of chilled smiles!

You may do whatever you'd like with snowflakes you make from this pattern, but you may not sell or republish the pattern. Thanks, and enjoy!

Finished Size: 6.5 inches from point to point
Materials: Size 10 crochet thread, size 7 crochet hook, empty pizza box, wax paper or plastic wrap, cellophane tape, water soluble school glue or desired stiffener, water, glitter, small container for glue/water mixture, paintbrush, stick pins that won't be used later for sewing, clear thread or fishing line

Happy Thoughts Snowflake Instructions

Special Stitches: fdc (foundation double crochet)

Make magic ring.

Round 1: Ch 2 (counts as 1 dc), 11 dc in ring; sl st in 2nd ch of starting ch 2. Pull magic circle tight.

Round 2: Ch 4 (counts as 1 tr), 2 tr in same ch as sl st, ch 2, sk next dc, 2 tr in next dc, ch 2, sk next dc, 3 tr in next dc, 1 fdc in bottom of tr just worked, 1 dc in same fdc ch, [1 fdc, 1 dc in same fdc ch] 13 times, working last dc of final repeat by drawing up loop through 2nd and 3rd chains of starting ch 4 for first 2 tr yo (creating a linked tr/dc); sl st in 4th ch of starting ch 4.

Round 3: 1 sc in each st around, increasing 3 times, with two of the increases in the eye spaces, for a total of 36 sc; sl st in starting sc.
If you're not reading this pattern on Snowcatcher, you're not reading the designer's blog. Please go here to see the original.

Round 4: Ch 6 (counts as 1 sc and [ch 5), sk next 2 sc, 1 sc in next sc] 11 times; ch 2, 1 tr in 1st ch of starting ch 6 to form 12th ch 5 sp of Round.

Round 5: Ch 4 (counts as 1 sc and [ch 3), in next ch 3 sp work (3 dc, ch 3, 3 dc)*, ch 3, 1 sc in next ch 3 sp] 6 times, ending * on final repeat; ch 1, 1 dc in 1st ch of starting ch 4 to form 18th ch 3 sp of Round.

Round 6: Ch 6 (counts as 1 sc and [ch 5), 1 sc in next ch 3 sp, in next ch 3 tip work (3 dc, ch 3, 3 dc)*, ch 3, 1 sc in next ch 3 sp] 6 times, ending * on final repeat; ch 1, 1 dc in 2st ch of starting ch 6 to form final ch 3 sp of Round.

Round 7: Ch 1 (counts as 1 sc), [in next ch 5 sp work (1 dc, ch 6, sl st in 3rd ch from hook, 1 sc in next ch, ch 2, 1 dc), 1 sc in next ch 3 sp, ch 3, in next ch 3 tip work (3 dc, ch 3, 3 dc), ch 3, 1 sc in next ch 3 sp] 6 times, omitting last sc of final repeat; sl st in starting sc; bind off. Weave in ends.

Finish: I've been stiffening my flakes with undiluted, full-strength water soluble school glue for quite a while now, and I've been squishing the glue onto and throughout each flake with my fingers (yucky mess!!!) instead of gingerly painting the flakes with glue. Yes, it's a mess. But it's faster. And stiffer.

Tape wax paper or plastic wrap to top of empty pizza box. Pin snowflake to box on top of wax paper or plastic wrap.

If using glue, mix a few drops of water with a teaspoon of glue in small washable container. Paint snowflake with glue mixture or desired stiffener. Sprinkle lightly with glitter. Wash paintbrush and container thoroughly. Allow snowflake to dry at least 24 hours. Remove pins. Gently peel snowflake from wax paper or plastic wrap. Attach 10-inch clear thread to one spoke, weaving in end. Wrap fishing line around tree branch (or tape to ceiling or any overhead surface) and watch snowflake twirl freely whenever you walk by! Snowflake also may be taped to window or tied to doorknob or cabinet handle.

Tweet

Snowflake Monday

Back in September of 2013, I crafted a series of smiling snowflakes. One pattern was published. The remainder of the prototypes hid in a bookshelf until spring cleaning this year and have re-ignited my addiction to smiling snowflakes. I originally had planned to make a whole rainbow of smiling flakes, but apparently became sidetracked by something that must have been more interesting and/or addictive at that time. I vaguely remember trying different smiling snowflake centers in an attempt to create just the perfect happy face.

The perfect face might further evolve as I attempt to reverse engineer these treasures. The prototype for today's pattern was my favorite smiling face of the group, but boy, was it ever a bear to reverse engineer. Sadly, I think it will be a bear for you to follow my written instructions, too... For whatever it's worth, this is my first attempt to create a video tutorial to assist you in what was difficult for me to write and what I expect may be very difficult for you to comprehend. I hope the video helps. If not, please just do a plain disk snowflake center and embroider or draw your smiling face after the snowflake is done. :)

Takatalvi is Finnish for "back winter". According to my Jyväskylä missionary, Takatalvi means "this super fun phenomenon in which you think it's finally getting warm, the birds start singing, the sun starts shining, and then the sky dumps another foot of snow on you just as you switch your coat for a rain jacket". In other words, Fools' Spring...

You may do whatever you'd like with snowflakes you make from this pattern, but you may not sell or republish the pattern. Thanks, and enjoy!

Finished Size: 6 inches from point to point
Materials: Size 10 crochet thread, size 7 crochet hook, empty pizza box, wax paper or plastic wrap, cellophane tape, water soluble school glue or desired stiffener, water, glitter, small container for glue/water mixture, paintbrush, stick pins that won't be used later for sewing, clear thread or fishing line

Takatalvi Snowflake Instructions

Special Stitches: fdc (foundation double crochet)

Make magic ring.

Round 1: Ch 2 (counts as 1 dc), 11 dc in ring; sl st in 2nd ch of starting ch 2. Pull magic circle tight.

Round 2: Ch 4 (counts as 1 tr), 2 tr in same ch as sl st, ch 2, sk next dc, 2 tr in next dc, ch 2, sk next dc, 3 tr in next dc, 1 fdc in bottom of tr just worked, 1 dc in same fdc ch, [1 fdc, 1 dc in same fdc ch] 11 times, working last dc of final repeat by drawing up loop through 2nd and 3rd chains of starting ch 4 for first 2 dc yo (creating a linked tr/dc); sl st in 4th ch of starting ch 4.

Round 3: 1 sc in each st around, increasing 6 times evenly spaced, for a total of 42 sc; sl st in starting sc.
If you're not reading this pattern on Snowcatcher, you're not reading the designer's blog. Please go here to see the original.

Round 4: Sl st in next sc, 1 sc in next sc, [ch 5, sk next 2 sc, 1 sc in next sc, ch 10, sk next 3 sc, 1 sc in next sc] 5 times; ch 5, sk next 2 sc, 1 sc in next sc, ch 5, 1 tr in starting sc to form 6th ch 10 loop of Round.

Round 5: Ch 6 (counts as 1 tr and ch 3), 1 dc over post of tr directly below, [ch 5, 1 sc in next ch 5 loop, ch 5, in next ch 10 loop work (1 dc, ch 3, 1 tr, ch 5, 1 tr, ch 3, 1 dc)] 5 times; ch 5, 1 sc in next ch 5 loop, ch 5, 1 dc in next ch 10 loop, ch 3, 1 tr in same loop, ch 2, 1 tr in 3rd ch of starting ch 6 to form 6th ch 5 tip of Round.

Round 6: Ch 6 (counts as 1 sc and ch 5), 1 sc over post of tr directly below, [ch 3, 1 sc in next ch 3 sp, [1 sc in next ch 5 sp, ch 3] 2 times, 1 sc in next ch 3 sp, ch 3, in next ch 5 point work (1 sc, ch 3, 1 sc, * ch 5, 1 sc, ch 3, 1 sc] 6 times, ending * on final repeat; sl st in 1st ch of starting ch 6; bind off. Weave in ends.

Finish: I've been stiffening my flakes with undiluted, full-strength water soluble school glue for quite a while now, and I've been squishing the glue onto and throughout each flake with my fingers (yucky mess!!!) instead of gingerly painting the flakes with glue. Yes, it's a mess. But it's faster. And stiffer.

Tape wax paper or plastic wrap to top of empty pizza box. Pin snowflake to box on top of wax paper or plastic wrap.

If using glue, mix a few drops of water with a teaspoon of glue in small washable container. Paint snowflake with glue mixture or desired stiffener. Sprinkle lightly with glitter. Wash paintbrush and container thoroughly. Allow snowflake to dry at least 24 hours. Remove pins. Gently peel snowflake from wax paper or plastic wrap. Attach 10-inch clear thread to one spoke, weaving in end. Wrap fishing line around tree branch (or tape to ceiling or any overhead surface) and watch snowflake twirl freely whenever you walk by! Snowflake also may be taped to window or tied to doorknob or cabinet handle.

Tweet

Snowflake Monday

I recently had a special request for a smiley snowflake. I pointed out there are already at least two smiley snowflakes I know of: Snowflake/Snöflingan and Xue the Snowflake. Yet there is always room in the world for one more smiling snowflake.

I wanted mine to be different from the existing smiley snowflakes, so I played with thread for a bit while The Lizard curiously watched. After six attempts at creating a lace smiley and finally coming up with a workable piece, The Lizard, who normally does not sing, crooned, "Smile, you're on Candid Snowflake!"

Hence, the name!

You may do whatever you'd like with snowflakes you make from this pattern, but you may not sell or republish the pattern. Thanks, and enjoy!


Finished Size: 5.5 inches from point to point
Materials: Size 10 crochet thread, size 8 crochet hook, empty pizza box, wax paper or plastic wrap, cellophane tape, water soluble school glue or desired stiffener, water, glitter, small container for glue/water mixture, paintbrush, stick pins that won't be used later for sewing, clear thread or fishing line

Candid Snowflakes Instructions

Make magic ring.

Round 1: Ch 2 (counts as 1 dc), 11 dc in ring; sl st in 2nd ch of starting ch 2. Pull magic circle tight.

Round 2: Ch 2 (counts as 1 dc), 1 dc in same ch, 2 dc in next dc, ch 2, sk next dc , 2 dc in next dc (1st eye made), ch 2, sk next dc, 2 dc in each of next 2 dc (2nd eye made, mouth about to be formed), draw up loop through middle of dc just made, yo and draw through 1 loop on hook (counts as foundation ch 1), yo and draw through both loops on hook (sc made in foundation sc style), 1 sc in same foundation ch, * draw up loop through same foundation sc ch, yo and draw through1 hook on ch (counts as ch 1), yo and draw through both loops on hook (sc made), 1 sc in same foundation ch; repeat from * 3 times for a total of 10 foundation sc to complete mouth, sl st in 2nd ch of starting ch 2.












Round 3: 1 sc in same ch as sl st, 2 sc in next dc, 1 sc in next dc, 2 sc in next dc, 3 sc in next ch 2 sp, 1 sc in next dc, 2 sc in next dc, 3 sc in next ch 2 sp, * 1 sc in next st, 2 sc in next st; repeat from * 7 times for a total of 36 sc around; sl st in starting sc. You should have a perfect smiley disk now, and may bind off here if you don't want the snowflake edging.
If you're not reading this pattern on Snowcatcher, you're not reading the designer's blog. Please go here to see the original.

Round 4: 1 sc in same ch, ch 3, sk 2 sc, * 1 sc in next sc, ch 5, sk next 2 sc, 1 sc in next sc, ch 3, sk 2 sc; repeat from * around 4 times; 1 sc in next sc, ch 2, 1 tr in starting sc to form 6th ch 5 sp of Round.

Round 5: Ch 5 (counts as 1 dc and ch 3), 1 dc in same sp, * ch 3, 1 sc in next ch 3 sp, ch 3, 1 dc in next ch 5 sp, [ch 3, 1 dc in same sp] 2 times; repeat from * around 4 times; ch 3, 1 sc in next ch 3 sp, ch 3, 1 dc in next ch 5 sp, ch 3, 1 dc in same sp, ch 3, sl st in 2nd ch of starting ch 5.

Round 6: Sl st in next ch 3 sp, ch 2 (counts as 1 dc), 3 dc in same sp, 1 tr in same sp, sk next 2 ch 3 sp, * 1 tr in next ch 3 sp, 4 dc in same sp, 1 dc in next ch 3 sp, ch 12, 1 dc in 12th ch from hook, 1 dc in same sp, 4 dc in next ch 3 sp, 1 tr in same sp, sk next 2 ch 3 sp; repeat from * around 4 times; 1 tr in next ch 3 sp, 4 dc in same sp, 1 dc in next ch 3 sp, ch 12, 1 dc in 12th ch from hook, 1 dc in same sp; sl st in 2nd ch of starting ch 2.

Round 7: 1 sc in join between dc just worked in Round 6 and next 4/dc group, * ch 5, 1 sc between next 2 tr, ch 5, 1 sc in same sp (picot made), ch 5, 1 sc in joint between next 4/dc group and dc, ch 1, 8 dc in next ch 12 loop, ch 6, sl st in 5th ch from hook (picot made), ch 1, 8 dc in same ch 12 loop, ch 1, 1 sc in joint between next dc and 4/dc group; repeat from * around 5 times, omitting last sc of final repeat; sl st in starting sc; bind off. Weave in ends.

Finish: Tape wax paper or plastic wrap to top of empty pizza box. Pin snowflake to box on top of wax paper or plastic wrap.

If using glue, mix a few drops of water with a teaspoon of glue in small washable container. Paint snowflake with glue mixture or desired stiffener. Sprinkle lightly with glitter. Wash paintbrush and container thoroughly. Allow snowflake to dry at least 24 hours. Remove pins. Gently peel snowflake from wax paper or plastic wrap. Attach 10-inch clear thread to one spoke, weaving in end. Wrap fishing line around tree branch (or tape to ceiling or any overhead surface) and watch the snowflake twirl freely whenever you walk by! Snowflake also may be taped to window or tied to doorknob or cabinet handle.

Tweet